SIL-O-WET® series passivation type ink water-based aluminum pigment
Sil-o-Wet series passivation ink water-based aluminum pigments: used in Sil-o-Wet® series products
A chemical passivator treatment is used to inhibit the reaction of aluminum in the water system. Such products are also
One of the recommended products for water-based inks. This grade product exists in the form of isopropanol slurry and is pushed
Recommended for flexographic printing ink or gravure printing ink formulations. Produced through Sil-o-Wet® series
The stability of the product in an aqueous system depends on the design of the system. High-shear mixing will reduce
The effect of the low passivation agent damages the aluminum flakes, so this phenomenon should be avoided.
Sil-o-Wet®Inhibited Aluminum
Pigments Water-based,Stabilised
Sil-o-Wet® Passivation Aluminum Pigment
|
CATEGORY
Type
|
%NV
(BY WEIGHT)
Solid content%
(By weight)
|
Aluminum
Flake Cont.%
Aluminum flake content%
|
D (50%) (MICRONS)
Particle size D (50%) (micron)
|
Solvent
Solvent
|
Sil-o-Wet® 651-PA
|
L floating
|
70
|
63
|
7
|
IPA
|
Sil-o-Wet® 011 NL-PA
|
NL non-floating
|
65
|
61
|
11
|
IPA
|
Sil-o-Wet® Premier 014NL-PA
|
NL non-floating
|
70
|
64
|
14
|
IPA
|